$34.99
The PTO Align™ spanner wrench is designed to assist the alignment and rotation of most PTO implement shafts to tractors when connecting the driveline using the PTO Link® System. Because some tractors do not “freewheel” at the tractor’s PTO, in these cases, the alignment tool helps to leverage the implements that need the extra ‘encouragement’ to rotate for alignment, connection, or disconnection of some challenging implements (i.e., Flex-wing, flail, finish mowers, etc.).
NOTICE: The PTO Align™ Spanner Wrench is compatible with all PTO Link® SD, HD & most Compact* Systems.
NOTICE: All PTO Link Systems add 5 inches to your driveline. See description tab below for more details. In rare situations, the PTO Link® System may not be compatible with your tractor and implement setup.
The PTO Align™ Spanner Wrench is designed to assist the alignment and rotation of PTO shafts while connecting to the PTO. Even in cases where PTOs may not “freewheel”, the PTO Align™ Wrench used in combination with the PTO Link® Implement Coupler, creates leverage for rotating the implement’s driveline, especially for those challenging implements (e.g., flex-wing mowers, flail mowers, or finishing mowers, etc.) that may need that little extra ‘encouragement’ for PTO alignment, connection, or disconnection.
Patent Pending.
Dimensions: 12.375″ (L) x 2.5″ (W) x 0.25″ (D)
Weight: 13.8 oz
Patent Pending
Another helpful compatible tool for connecting the PTO is the PTO Sling™, which lifts and supports any heavy implement shaft while coupling the shaft to the tractor’s PTO spline.
NOTICE: The PTO Align™ Spanner Wrench is compatible with all PTO Link® SD, HD & most Compact* Systems.
*When using the PTO Link® Compact System, the wrench is only compatible with the latest Implement Coupler featuring the black-and-white label as shown in the photo gallery.
The PTO Align™ Spanner Wrench is made of high-quality steel. The Wrench works most effectively when used in combination with the PTO Link® System. The unique offset angle of the Wrench allows easier access under most PTO shields to either rotate the PTO spline or the implement coupler’s spline of the PTO Link® System. The Wrench is typically placed onto the splines in the space between the end of the implement female receiver of the driveline and the installed PTO Link® Implement (Male) Coupler where the splines are visible. If the tractor spline has the PTO Link® Tractor (Female) Coupler already installed, the tractor side coupler can be turned by hand in most cases without getting grease on your hands. Rotation of the implement side is where the PTO Align™ Spanner Wrench really shines…whenever that extra leverage is needed.
As an important safety precaution, be sure to turn OFF the tractor’s engine during the use of this tool, and do NOT attempt to use the tool with any parts of the PTO or driveline that may be rotating. Do not wear any loose clothing that could become entangled and pulled into the machine. PTO safety is extremely important, and every precaution should be taken.
The PTO Align™ Spanner Wrench is designed to assist the alignment and rotation of PTO shafts while connecting to the PTO. Even in cases where PTOs may not “freewheel”, the PTO Align™ Wrench used in combination with the PTO Link® Implement Coupler, creates leverage for rotating the implement’s driveline, especially for those challenging implements (e.g., flex-wing mowers, flail mowers, or finishing mowers, etc.) that may need that little extra ‘encouragement’ for PTO alignment, connection, or disconnection.
Patent Pending.
Dimensions: 12.375″ (L) x 2.5″ (W) x 0.25″ (D)
Weight: 13.8 oz
Patent Pending
Another helpful compatible tool for connecting the PTO is the PTO Sling™, which lifts and supports any heavy implement shaft while coupling the shaft to the tractor’s PTO spline.
NOTICE: The PTO Align™ Spanner Wrench is compatible with all PTO Link® SD, HD & most Compact* Systems.
*When using the PTO Link® Compact System, the wrench is only compatible with the latest Implement Coupler featuring the black-and-white label as shown in the photo gallery.
The PTO Align™ Spanner Wrench is made of high-quality steel. The Wrench works most effectively when used in combination with the PTO Link® System. The unique offset angle of the Wrench allows easier access under most PTO shields to either rotate the PTO spline or the implement coupler’s spline of the PTO Link® System. The Wrench is typically placed onto the splines in the space between the end of the implement female receiver of the driveline and the installed PTO Link® Implement (Male) Coupler where the splines are visible. If the tractor spline has the PTO Link® Tractor (Female) Coupler already installed, the tractor side coupler can be turned by hand in most cases without getting grease on your hands. Rotation of the implement side is where the PTO Align™ Spanner Wrench really shines…whenever that extra leverage is needed.
As an important safety precaution, be sure to turn OFF the tractor’s engine during the use of this tool, and do NOT attempt to use the tool with any parts of the PTO or driveline that may be rotating. Do not wear any loose clothing that could become entangled and pulled into the machine. PTO safety is extremely important, and every precaution should be taken.
Our office hours are Monday - Friday from 9:00 AM - 5:00 PM CST.
Please expect a response within 24 business hours.
