PTO Link™ HD – Replacement Shear/Locking Pin & Plunger Pin Combo

$27.99

Pre-Order Now

PTO Link™ HD – Replacement Shear/Locking Pin

Product Features:

  • Safety Shear/Locking Pin-HD (replacement)
  • Spring Loaded
  • Stainless Steel
  • For Use with PTO Link™ HD – Tractor Plate (Female)
  • Dimensions: (2” L x 0.75” W) 1/2” threads
  • Weight:
    • HD Shear/Locking Pin Weight: 2.3 oz
  • NOTE: When replacing, use Loctite® Threadlocker 271 Red (INCLUDED) on housing threads and wrench tighten housing to plate

PTO Link™ HD – Safety Plunger Pin (SLIC Pin™)

The PTO Link™  HD Safety Plunger Pin  (SLIC Pin™) also known as the Quick-Release SLIC Pin is truly one slick pin! SLIC is an acronym for Self Locking Implanted Cotter Pin, and as the name implies, it is a pin and cotter all in one! This one-piece locking clevis pin is fast and secure. It also acts as an alignment pin for the two mating plates of the PTO Link™ system and further secures the plates (much like a dead bolt lock) to withstand most high torque scenarios or instances wherein reverse torque on the PTO shaft could possibly be experienced (e.g., while using flex-wing mowers, heavy duty shredders, tillers, augers, stump grinders, PTO auto-brakes or reverse safety switches etc.). Since these high torque or reverse torque scenarios on the PTO are often unforeseen, it is therefore required to always install the safety plunger pin during use of the PTO Link™ system.

The PTO Link™ system already comes with a replaceable spring- loaded shear/locking pin affixed onto the tractor (female) plate that engages with the implement (male) plate for the initial connection. The additional Safety Plunger Pin (included standard in all system packages) provides the following benefits:

  1. Snugly aligns and secures the male and female plates of the PTO Link™ system together to minimize vibration and wear to your driveline;
  2. Balances and absorbs excess torque across the entire plate diameter of the PTO Link™ system, providing added strength to your PTO connection during high torque or reverse torque scenarios.
  3. Provides enhanced safety, protection and durability to your PTO Link™ system.

The Safety Plunger Pin features a strong, spring-loaded plunger that functions as an easy insertion wedge. The wedge plunger retracts when inserted, then springs back up when through the joined plates. The vertical face at the rear of the plunger prevents backing out and locks the pin into place!

Installation instructions: Prior to installing the plunger pin, first install the PTO Link™ plates each separately on the tractor’s PTO (female plate) and implement shaft receiver (male plate). Next, couple the male and female plates together, aligning the studs of the male plate into the openings of the female plate. Then slightly rotate the male plate counter-clockwise (or the female plate clockwise) until the two connected plates are fully mated and the stainless steel spring loaded shear/locking pin has fully engaged. Now, note the aligned 1⁄2” opening through both plates of the fully mated PTO Link™ system, positioned across the plate, opposite the stainless steel spring loaded shear/locking pin. To install the safety plunger pin, place tip of the pin into the 1⁄2” opening on the tractor plate. With the head of the safety plunger pin always facing the tractor, push the pin through the aligned 1⁄2” openings on both plates. The wedge of the plunger pin (now emerging from the implement side plate) will release its internal spring and secure both plates together. 

To uninstall, just depress the wedge plunger and push the end of the pin toward the tractor. Then, pull the head of the emerging pin through the plates from the tractor side, releasing the pin from the mated plates. Once accustomed to the Safety Plunger Pin, your process to reinstall and uninstall will take only a few seconds. When the PTO LinkTM system is not in use, affix the safety plunger pin through the 1⁄2” opening on the tractor plate for convenient storage. 

  • Dimensions: (1.50” L x 0.625” W)
  • Weight:
    • HD Plunger Pin Weight: 1.3 oz
    • HD Shear/Locking Pin Weight: 2.3 oz
  • Shipping Weight: 5 oz

Additional information

Weight.2375 lbs