Choose your Bundle for

PTO Link® HD System

PTO Link HD System Duo Bundle

The PTO Link HD System is designed for compact or utility tractors rated from 35 HP up to 130 HP (engine net), and with most 3-point hitch or pull behind implements.   PTO Link® is the original, universal PTO quick-connect system consisting of two interconnecting steel couplers. Its patented Open-Plate™ design replaces the traditional spline-to-driveline connection with a visible interface that’s both easy to see and reach. Now you can quickly and safely connect / disconnect implements at the tractor’s PTO in just seconds! A complete PTO Link® System requires both a Tractor (Female) Coupler and an Implement (Male) Coupler. For best results, every tractor should be equipped with a Tractor Coupler, and every power-driven implement should be equipped with an Implement Coupler.  See more descriptions and information below.

Discounted Bundles - Buy More, Save More!

Or...BYOB (Build Your Own Bundle) - HD System

Click on Any Bundle Above, Then at the Cart, Customize Your Own!

Designed for:

  • Any compact or utility tractor (from 35 HP up to 130 HP) with Category 1 or 2 implements
  • Any pull-behind implements, including flex-wing or batwing rotary cutters
  • Tractor owners who tend to be rough on their equipment
  • Standard PTO spline length (3″ and longer)
  • High Torque (>650 ft.lbs) scenarios or with heavy duty implements (e.g., stump grinders, balers, augers, flail mowers, water pumps, large tillers) where reverse torque is common

Note: The HD System adds 5 inches to the implement’s driveline. See FAQ #5 and #6 for driveline measurement instructions and video.

For safety, the female or male mating plate components of the HD System are NOT compatible nor interchangeable with the SD or Compact Systems!

  • Works with rear 6-spline 540 RPM PTO for tractors 35 HP up to 130 HP
  • Designed for all tractors using mowers/shredders 8 feet or wider and / or flex-wing/batwing rotary cutters
  • Easily connect your mower, shredder, tiller or any PTO driven implement in seconds!
  • Simple one-step installation for each plate and easy removal. No special tools or extra installation hardware required (i.e., no set screws, snap rings or retaining clips)
  • Built to last (AISI 4140 hardened alloy steel with QPQSM finish)
  • Safety Plunger Pin included with every tractor (female) plate (extras ordered separately)
  • When fully installed, the PTO Link HD system adds approximately 5 inches to the overall length of the driveline.
  • The PTO Link is NOT an adapter. To be in compliance with ASABE standards, do not use the PTO Link system in combination with PTO adapters.
  • Our limited warranty covers all manufacturing defects in materials or workmanship of all PTO Link parts for one year from the date of purchase.
  • Dimensions:
    • HD Tractor (Female) Plate (4.75” W x 3.875” H)
    • HD Implement (Male) Plate (4.75” W x 5” H)
  • Weight:
    • HD Tractor (Female) Plate: 4 lbs, 3 oz
    • HD Implement (Male) Plate: 4 lbs, 5 oz
    • Weight will vary depending on the kit

As an important safety precaution, be sure to turn off tractor’s engine during installation, shield any rotating parts and do not wear any loose clothing that could become entangled and pulled into the machine. PTO safety is extremely important and every precaution should be taken.

How to Measure Driveline to Determine if Shortening is Needed
Play Video
Which PTO Link is right for me? Try our Tractor/Product Match Me Wizard!
Join Waitlist We will inform you when this product arrives in stock. Please complete the form below.

Sales & Customer Support

Our office hours are Monday - Friday from 9:00 AM - 5:00 PM CST.
Please expect a response within 24 business hours.

Name(Required)
Department(Required)
This field is for validation purposes and should be left unchanged.